Modification of m2 racer Eagle Saddle

The cold season to come is finally in full swing today.
My wardrobe for the winter (for less than 6 ℃ Mekasaito said) I had finished for the summer with little cold for a hot hot day last week that there are only gay places in bib shorts , finally reinvented itself.
For summer, "s5" pad to the saddle pad is not required for older models in winter (orange pad), I get a pain in the groin in two places and take so long. Replace the pad with the saddle during the winter months there. Users do not have time to ride the bike shorts say a roller bed.
Spare base "m2 racer Eagle" is. The 5mm thick paste based on urethane foam, the skin of the diamond python (aiming to be the wrong way-slip effect) and paste.The body color is so plain bright lime green.
[Paste] on the pad
The double-sided tape on the front paste the material you want to saddle pad, and cut off the protruding place. If not put a leather 済Maseru, such as urethane foam is recommended for up to about 10 mm from 5mm. Once the urethane and then temporary fixing, drop the uniform angular angular stroke water-resistant paper put on the saddle before the finish to clean up and as ready-made to your overall shaping. If the leather on the pad, the internal urethane safe to leave off.
[Leather] for crucifixion
Provide a cycle greater than the cut surface of saddle leather. Infringe the bond pad (I used my glue steel) and smearing the entire surface of the pad reaches the halfway dry, apply the leather to the back and to involve in it. Keep the glue to dry ※ sewn to fit the back portion of the saddle and pull (or even if you tape the coil less viscous), glued to the back of the saddle and ready to leave town to finish off the dry is.
Make a well in line with the original shape even fairly complicated shape, as in the picture With thin stretchy leather. Suffers from 落車 off the side with a simple task requiring no special tools are also useful for playing favorite who beat the saddle leather.
※ "sewn on the back" method when doing the pads to be used as interior materials, etc. can not be fixed Sorubosein Toka Gel pads and double-sided adhesive tape does not need 居Ru stuck to the side and saddle leather possible. Then, glue pad on top of the steel is so hard and dry is better to be 塗Ranai.

Posted in: saddles